Single Processor Pentium4 Blades with 4 PCI slots (3.3v), SATA drive (s)

SP1 Pentium4 Blade PC with 4 PCI slots (3.3v) and SATA drive(s)

For BladeStation  rackmount enclosures Four 3.3v PCI adapter support 3.4GHz processor speed with 800MHz front side bus Hardware RAID1 capability per blade PC

The SP1 double-wide blade PC features a Pentium4 processor, a 533MHz or 800MHz front-side bus with hyperthreading support, two 10/100/1000 Ethernet controllers, and an on-board video controller. Each SP1 blade PC features one or two dual Serial ATA local drives (hardware RAID1), and 4 full Length 32-bit PCI adapter slots by utilizing a PCI riser. Up to 4 GB DDR RAM is supported with half length and low profile PCI adapters.  (Up to 2GB DDR RAM is supported with dual hard drives (RAID1) or a full length PCI adapter.  Please call Cubix Sales for details.) Up to 3 single-wide blade PC carriers fit in a BladeStation rackmount enclosure, each with RAID1 capability.

Instead of using low-performance, high cost mobile chips, Cubix uses standard Intel Pentium4 or Celeron desktop processors in conjunction with the high performance Intel 865GV chipset to achieve outstanding blade PC price / performance value.

The blade PC, drive(s) and PCI adapter are vertically positioned next to each other, and are front-extractable as a set for easy serviceability. Each SP1 blade PC contains a Cubix Monitoring Controller (CMC) that is an independent computer with its own Ethernet NIC, IP stack and processor. For details on managing blade PCs, please link to CubixVision. KVM switching is built into each blade through the CMC. Additionally a set of KVM connectors is available at the front of each blade for direct KVM connection if desired.

Specifications:

Processor:
Pentium4, 800MHz or 533MHz FSB
Celeron, 400 MHz FSB (optional)

Chipset:
Intel 865GV

Memory:
400/266 MHz DDR

Ethernet:
Intel 82541 10/100/1000 (2)

Front panel:
LED: power good status
LED: hold reset status
LED: KVM selected status
LED: blade locator for service
KVM select button
Blade reset button
COM1
Video
2 dual stack USB (2 connectors)
PS2 keyboard /mouse

PCI riser:
4 PCI slot @ 33 MHz, 32-bit, 3.3 volt

Weight:
12 lbs (carrier, blade, hard drive)